1/4 20t One Hole Fins - US$ 5.75 each These Wakeboard fins have two super secure and strong molded in locating studs, with one center 1/4 20 threaded hole, all on the standard 3/4 inch centers. Tracker Wakeboard Fin uses single hole mount because on side impact, a fin mounted with one screw is more likely to spin rather than tip over and rip the screws into the board, or worse rip though the board. You can mount single hole fins by simply drilling a 1/4 inch hole in the middle of your two existing holes. Please measure the length you need (thickness of your board at the mounting) and add at least 1/2 inch (13mm) extra for thread engagement in the fin. For our single hole 1/4 20T fins, we recommend allen socket screws using a 2 inch long allen wrench The single hole fins use “one” 1/4 20T screw per fin. In most cases, fins have been mounted with either one screw or two screws based on a 3/4 inch (19mm) centers, or 1 1/2 inch (38.1mm) between the locating studs or screws If you are not sure about the length, please feel free to contact us with the information of thickness of your board. Then we will send you the correct Screw. NOTE: Screw and Washer are not included with the fin. If you need them, you must order them. The cost is 95 cents per screw/washer.
	Model: 1.5 Ramp Fin - 1/4 20t single hole Color: SharkGray Sale Price : US $5.75/ea Good as Wakeboard fins & Wakeskate fins ********************************************************
	Model: 2.0 Ramp Fin - 1/4 20t single hole Color: SharkGray Sale Price : US $5.75/ea Good as Wakeboard fins ********************************************************
	Model: 2.5 Ramp Fin - 1/4 20t single hole Color: SharkGray Sale Price : US $5.75/ea Good as Wakeboard fins ********************************************************
	Model: 2.0 Flat Head Fin - 1/4 20t single hole Color: SharkGray Sale Price : US $5.75/ea Good as Wakeboard fins ********************************************************
	Model: 2.5 Flat Head - Surf Style Fin - 1/4 20t single hole Color: SharkGray Sale Price : US $5.75/ea Good as Wakeboard fins & Kiteboard fins ********************************************************
	Model: 2.5 Surf Fin - 1/4 20t single hole Color: SharkGray Sale Price : US $5.75/ea Good as Wakeboard fins & Kiteboard fins ********************************************************
	Model: 1-5/8 Slider Fin - 1/4 20t single hole Color: SharkGray Sale Price : US $5.75/ea Good as Wakeboard fins ********************************************************
	Model: 1.1 Long Ramp Fin - 1/4 20t single hole Color: SharkGray Sale Price : US $5.75/ea Good as Wakeboard fins & Kiteboard fins ********************************************************
	Model: 1.3 Long Ramp Fin - 1/4 20t single hole Color: SharkGray Sale Price : US $5.75/ea Good as Wakeboard fins & Kiteboard fins ********************************************************
	Model: 1.7 Long Ramp Fin - 1/4 20t single hole Color: SharkGray Sale Price : US $5.75/ea Good as Wakeboard fins & Kiteboard fins ********************************************************
	Model: 2.0 Long Ramp Fin - 1/4 20t single hole Color: SharkGray Sale Price : US $5.75/ea Good as Wakeboard fins & Kiteboard fins ********************************************************
	Model: No Nonsense Screws and Washers - 1/4 20t Material: Stainless Steel Sale Price : $0.95 (1 screw & 1 Washer) Wakeboard fins & Kiteboard fins ********************************************************
	Model: Allen Wrench - for 1/4 20t screw Material: Stainless Steel Sale Price : $0.95 (1 screw & 1 Washer) Wakeboard fins & Kiteboard fins ********************************************************
10-24t Two Hole Mount Gloss Fins - US$ 9.95 each Custom Wakeboard fins are molded epoxy/glass hand finished to a beautiful black gloss. They are tapped with four 10-24 screw holes on Ύ inch centers so you can move them Ύ inch or use the extra hole if one hole gets damaged. Two screws will be placed in locating studs. Please measure the length you need (thickness of your board at the mounting) and add at least 1/2 inch (13mm) extra for thread engagement in the fin. In most cases, fins have been mounted with either one screw or two screws based on a 3/4 inch (19mm) centers, or 1 1/2 inch (38.1mm) between the locating studs or screws. If you are not sure about the length, please feel free to contact us with the information of thickness of your board. Then we will send you the correct Screw. NOTE: Screw and Washer are not included with the fin. If you need them, you must order them. The cost is 95 cents per screw/washer.
	Model: 2.5 Surf Gloss Fin - 10-24t two hole mount Color: Gloss Black Sale Price : US $9.95/ea Good as Wakeboard fins & Kiteboard fins ********************************************************
	Model: 2.0 Flathead Gloss Fin - 10-24t two hole mount Color: Gloss Black Sale Price : US $9.95/ea Good as Wakeboard fins & Kiteboard fins ********************************************************
	Model: 1.25 Kite Gloss Fin - 10-24t two hole mount Color: Gloss Black Sale Price : US $9.95/ea Good as Wakeboard fins & Kiteboard fins ********************************************************
	Model: 1.4 Kite Gloss Fin - 10-24t two hole mount Color: Gloss Black Sale Price : US $9.95/ea Good as Wakeboard fins & Kiteboard fins ********************************************************
	Model: 1.75 Kite Gloss Fin - 10-24t two hole mount Color: Gloss Black Sale Price : US $9.95/ea Good as Wakeboard fins & Kiteboard fins ********************************************************
	Model: 2.0 Kite Gloss Fin - 10-24t two hole mount Color: Gloss Black Sale Price : US $9.95/ea Good as Wakeboard fins & Kiteboard fins ********************************************************
	Model: Screws and Washers - 10-24t for Gloss Fin Material: Stainless Steel Sale Price : $0.95 (1 screw & 1 Washer) Wakeboard fins & Kiteboard fins ********************************************************